Skip to main content
Madaya
Madaya
New Member
May 13, 2022
Solved

Centrlized WLAN

  • May 13, 2022
  • 2 replies
  • 2038 views

Hi,

I am new to fortinet, I need to setup a network consists of two FortiGate1101E with forti Authenticator, Forti Manager and Forti Analyzer  in the HQ and about 100x FG-40F in branches. In each branch, I have one FortiAP and One FortiSwitch.

The branches with will connect via IPsec tunnels to the HQ.

My question

Can I create one single wireless network all the beaches, the core firewall or do I have to create a WLAN in each remote branch separately?

Is there a design document to help with my scenario?

 

Thanksforti.JPG

2.12.0.0
2.12.0.0
2.12.0.0
Best answer by aahmadzada

Hi Madaya,

 

Generally speaking, that is possible. If you have Frotimanager and exact the same setup on all branches, you can look after the ZTP(Zero touch provisioning) deplyoment.

This document should give you an understanding of the ZTP concept :

https://docs.fortinet.com/document/fortigate/6.4.0/sd-branch-ztp-framework-with-fortimanager/910789/uses-cases-and-topologies

 

Ahmad

2 replies

Anthony_E
Staff
Anthony_E
Staff
May 16, 2022

Hello Madaya,

 

Thank you for using the Community Forum.

I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

 

Regards,

Best Regards
aahmadzada
Staff
aahmadzadaAnswer
Staff
May 16, 2022

Hi Madaya,

 

Generally speaking, that is possible. If you have Frotimanager and exact the same setup on all branches, you can look after the ZTP(Zero touch provisioning) deplyoment.

This document should give you an understanding of the ZTP concept :

https://docs.fortinet.com/document/fortigate/6.4.0/sd-branch-ztp-framework-with-fortimanager/910789/uses-cases-and-topologies

 

Ahmad

    Madaya
    MadayaAuthor
    New Member
    June 7, 2022

    Thanks Ahmad,

    2.12.0.0
    Terms & ConditionsAccessibility statement