Skip to main content
yashaswinits_FTNT
Staff
Staff
Feb 13, 2017 12:54 PM UTC

Technical Note: SSID disappears when ARRP is enabled on the controller

  • Apr 16, 2026 1:43 PM UTC
  • 0 replies
  • 1649 views
  • Translate All
Description
This article explains why SSID may disappear when ARRP was enabled on the controller.

Scope
Meru controller, 8.1 and later.

Solution
ARRP is one of the new features which has introduced in Firmware 8.1 and later, where in APs scan the best available channel to operate and the controller in turn allocates these channels to AP radios.

ESS profile with virtual cell configuration will no longer be broadcasted by APs when ARRP is enabled as virtual cell configuration is a single channel configuration. 

The RF virtualization mode must be changed in every ESS profile to native cell in order to make any 802.11ac AP to broadcast the SSID.

Note that once ARRP is disabled all the ESS profiles remain unchanged and APs will continue to broadcast the SSID’s in native cell configuration only.

yashaswinits_FD40233_tn_FD40233-1.jpg

Risk and Resilience in the Age of AI. An OT Thought Leadership Summit for Houston's Critical Infrastructure Leaders. Date: Thursday, December 3, 2026. Time: 8:30 am - 1:30 pm (CT). Location: The Westin Houston, Memorial City | 945 Gessner Road, Houston, TX 77024