Meru Technical Note - Xprintserver issue - Unable to Print Wirelessly
Xprintserver issue - Unable to Print Wirelessly.
Scope
KB ARTICLE TYPE: Configuration
RELATED PRODUCTS: MC1000, MC1500, MC3000, MC3200, MC4100, MC4200, MC5000
RELATED SOFTWARE VERSIONS: 3.6.1-67, 4.0-150, 4.0-165
KEYWORDS: print, wirelessly
Solution
Check the ESS profiles --
Multicast is enable on the ESS profile ( No Tunnel )
ESS profile is test profile -- with confirmation, deleted that.
Test AirPrint -- it should work fine now.
Configuring Multicasting
DESCRIPTION: Multicasting is an advanced feature and can cause subtle changes in your network. Multicast is allowed only when the ESS has a one-to-one mapping with the default VLAN for this ESS. No other ESS can use the same VLAN. By default, multicasting is disabled.
CONFIGURATION STEPS:
From GUI:
Configuration >> Wireless >> ESS >> Select ESS Profile>> Allow Multicast Flag: ON/OFF>> OK.
CLI Steps:
controller(config)#essid name
controller(config-essid)# multicast-enable
controller(config-essid)# exit
