Meru Technical Note - Configuring Silent Client Polling
Description
Scope
Solution
Use silent client polling to allow tracking information to be sent between the Controller and the APs, and between the AP and a phone that is not in a call or during power save. This feature keeps the system appraised of a client phone location if the client moves between APs while the phone is inactive.
Configuring Silent Client Polling
Scope
KB ARTICLE TYPE: Configuration
RELATED PRODUCTS: AP, controller
RELATED SOFTWARE VERSIONS: N/A
KEYWORDS: ESS, silent client, polling
Solution
Use silent client polling to allow tracking information to be sent between the Controller and the APs, and between the AP and a phone that is not in a call or during power save. This feature keeps the system appraised of a client phone location if the client moves between APs while the phone is inactive.
CONFIGURATION STEPS:
GUI Steps:
Configuration >> Wireless >> ESS >> Silent Client Polling : ON/OFF >> OK.
CLI Steps:
default(config)# essid name
default(config-essid)# silent-client-enable
default(config-essid)# end
