Meru Technical Note - Changing the Hostname on the controller

Changing the Hostname on the controller

KB Article Type: Configuration

Related Products: All Controller Models

Related Software Versions: 4.0 code base and above

Keywords: Hostname Configuration

Command for changing the hostname of the controller

CLI CONFIGURATION STEPS:

Step 1 : Type "configure terminal"

Step 2 : Type "hostname xyz"

Step 3 : Type "exit"

Step 4 : Type "reload controller"

Step 5 : When the controller reboots and comes online, the new hostname will be displayed.

TEST RESULTS: "show hostname" from the privileged exec mode displays the currently set hostname.

LIMITATIONS: A reboot is required for the changes to be implemented.