Technical Tip: FortiGate 100F/101F Interface Speed Issue
| Description | This article describes that after upgrading firmware from 7.2.6 to 7.2.8 or 7.4.x version, the WAN interface of FortiGate 100F/101F will not show the option to set speed with only the auto option left in the list. The other 1G copper interface will only show auto and 100full. |
| Scope | FortiOS, FortiGate 100F/101F. |
| Solution | Before upgrading to 7.2.6 or older firmware versions:
FG101F-1 (wan1) # set speed auto Automatically adjust speed. 10full 10M full-duplex. 10half 10M half-duplex. 100full 100M full-duplex. 100half 100M half-duplex. 1000full 1000M full-duplex.
FG101F-1 (port1) # set speed auto Automatically adjust speed. 10full 10M full-duplex. 10half 10M half-duplex. 100full 100M full-duplex. 100half 100M half-duplex. 1000full 1000M full-duplex.
After upgrading to 7.2.8 or 7.4.x:
FG101F-1 (port1) # set speed auto Automatically adjust speed. 100full 100M full-duplex.
FG101F-1 (wan1) # set speed auto Automatically adjust speed.
This issue has been fixed in the latest 7.2.9 firmware and 7.4.5 firmware. |
