Technical Tip: Configure multiple outgoing IP for explicit web proxy
Description
This article describes how to enable multiple outgoing IP for explicit web proxy.
Solution
To enable multiple outgoing IP for explicit web proxy, configure the secondary IP in the external interface for outgoing traffic.
1) Configure multiple secondary IP:
This article describes how to enable multiple outgoing IP for explicit web proxy.
Solution
To enable multiple outgoing IP for explicit web proxy, configure the secondary IP in the external interface for outgoing traffic.
1) Configure multiple secondary IP:
# config system interface2) Enable multiple outgoing IP address in explicit web proxy setting:
edit "port1"
set vdom "root"
set ip 10.1.1.73 255.255.252.0
set allowaccess ping https ssh http telnet
set type physical
set snmp-index 1
set secondary-IP enable
config secondaryip
edit 1
set ip 10.1.0.214 255.255.252.0
next
edit 2
set ip 10.1.0.215 255.255.252.0
next
end
next
end
# config web-proxy explicit3) Run sniffer command to verify if both IP are being used for outgoing traffic:
set status enable
set http-incoming-port 8080
set outgoing-ip 10.1.0.214 10.1.0.215
end
# diag sniffer packet port1 ‘host 10.1.0.214’ 4 0 lTo stop sniffer: Ctrl + C.
# diag sniffer packet port1 ‘host 10.1.0.215’ 4 0 l
