Technical Tip: Clearing hit count for SD-WAN rules

1. Run the command 'diag firewall proute list'.
   
   
2. Look for the relevant SD-WAN rule:

id=2130706435(0x7f000003) vwl_service=3(test) <----- 0x7f000003 is the Hex ID for this SD-WAN rule.

source(1): 0.0.0.0-255.255.255.255
destination(1): 0.0.0.0-255.255.255.255
hit_count=179316 last_used=2022-10-20 13:04:57

3. Run the following command: 
   
   diagnose firewall proute clear 0x7f000003

    

4. Result: 
   
   id=2130706435(0x7f000003) vwl_service=3(test)
   source(1): 0.0.0.0-255.255.255.255
   destination(1): 0.0.0.0-255.255.255.255
   hit_count=0 last_used=2022-10-20 13:05:58