I have 2 internetlines (2x 16MBit) on my fortigate FGT80C with v4.0,build0279,100519 (MR2 Patch 1)
There are 270 internal users, they should benefit from having 2 lines available. load-balancing should solve this.
Here the routing table:
FGTKolping (static) # show
config router static
edit 1
set device " wan1"
set gateway 188.20.116.xx
set weight 50
next
edit 2
set device " wan2"
set gateway 178.188.17.xx
set weight 50
next
end
so far so good. Now the problem:
FGTKolping # get router info routing-table all
S* 0.0.0.0/0 [10/0] via 188.20.116.xx, wan1, [0/50]
C 10.2.0.0/16 is directly connected, internal1
C 172.16.0.0/24 is directly connected, internal2
C 178.188.18.xx/30 is directly connected, wan2
C 188.20.116.xx/30 is directly connected, wan1
To my understanding there should be the WAN2 next to the S*-entry for static.
like in the fortigate document:
FGT1 # get router info routing-table all
S* 0.0.0.0/0 [10/0] via 192.168.2.2, port1
[10/0] via 192.168.3.2, port2
[10/0] via 192.168.4.2, port3
C 192.168.1.0/24 is directly connected, internal
C 192.168.2.0/24 is directly connected, port1
C 192.168.3.0/24 is directly connected, port2
C 192.168.4.0/24 is directly connected, port3
So, what I' m I missing? How to fix?
thx
Gerhard