Fortinet Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.

Forum Posts

1000C Upgrade from 5.2.10 to 5.6.6

Hello, We are upgrading our Fortinet 1000C from code 5.2.10 to 5.6.6 and as I'm looking at the release notes on 5.4.5 (attached, page 14 under Upgrading to FortiOS 5.6.0) I see the following verbiage. "If you have configured IPsec in version 5.4.5, a...

FortiGate200D

Hi, I am new to Fortigate 200D. I have port 13 connecting to Port 2 on ISP Adva switch. However ports 13/14 are members of external interface. Interface Name - external Type - Hardware Switch Physical Interface Members Port 13, Port 14 edit "external...

jaymis by New Contributor
  • 1371 Views
  • 4 Replies
  • 0 Likes

Limit Forticlient ISPEC VPN

Hello, We have an ipsec VPN connection problem with the forticlient. Our fortigate is linked to an active directory server. The first ten VPN connections work properly. If an eleventh person connects, the VPN mounts well. But there is no traffic (pin...

Cglobal71 by New Contributor
  • 2447 Views
  • 9 Replies
  • 0 Likes

60CM WAN to LAN Throughput Slow?

My first Fortigate product that's 'new to me'. It is running 5.2.13. I have worked with consumer routers, smb routers from Cisco and Netgear, and Watchguard on the upper end. This is my first foray into Fortigate. What I want to do is set up the 60CM...

SamirD by New Contributor
  • 757 Views
  • 1 Reply
  • 0 Likes

Port Forwarding VIP Inter VDOM Routing Question

Good Afternoon, I am looking to validate a configuration change: 1. I have a multi-tenant setup where each customer has its on vDOM on a FG1000D. 2. Two of the customer vDOM are linked with a functional vDOM vlink which permits the subnets within the...

FortiGod by New Contributor
  • 465 Views
  • 0 Replies
  • 0 Likes

How to allow access between remote IPSec endpoints?

Greetings, I have a FortiGate at the main office, subnet 192.168.1.0There are several hardware-based IPSec VPNs for remote locations:Remote office 2, subnet 192.168.2.0Remote office 3, subnet 192.168.3.0Remote office 4, subnet 192.168.4.0and so on.Th...