Fortinet Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.

Forum Posts

FG-100D show EXT2-fs error

HelloI can't boot, I have reinstalled the OS, but I still get the same error message. What should I do? Thank!--------------------FortiGate-100D (1109-01.11.2012) Ver04000009 Serial number ****** RAM activation CPU(00000106ca bfebfbff) MP initializat...

podo by New Contributor
  • 2233 Views
  • 4 Replies
  • 0 Likes

No ping to LAN gateway ipsec vpn

This issue seems normal but i need a solution which i haven't found since a long time. I have IPSEC connection in one of my branch ( 10.100.0.7/24 ) from the head office (10.100.0.1/24 ). LAN network of branch is 192.168.16.0/24. All the signal seems...

spider48 by New Contributor
  • 1508 Views
  • 2 Replies
  • 0 Likes

No internet access when connected to VPN

I'm running Arch Linux and using this AUR package, which is the latest version (4.0.2333) of FortiClient available for Arch Linux. I'm able to connect to my company's SSL VPN and access the company's resources, but when I try to access the internet (...

eyal_c by New Contributor
  • 8122 Views
  • 2 Replies
  • 0 Likes

Rebuild Database

Hi, I just wonder while rebuild db process is going on, can starting to upgrade fortianalyzer create a problem?

Resolved! ISSUES WITH SITE TO SITE IPSEC (Juniper-Fortigate)

FGT90D********** # ike 0:Juniper:Juniper: IPsec SA connect 5 200.2.185.178->194.209.69.10:0 ike 0:Juniper:Juniper: using existing connection ike 0:Juniper:Juniper: config found ike 0:Juniper: request is on the queue ike 0:Juniper:11: out 30BDB4CB6C55...

VEER by New Contributor
  • 9666 Views
  • 7 Replies
  • 0 Likes

Issue with Gre tunnel interface..

Hi,I have created a gre tunnel. It has created its interface but that inter face is not showing as connected interface at dc end while at remote site it is showing as connected interface in routing table. Dc side I have tried to bind an interface to ...