Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
1mm
Contributor

Fortigate Azure and Zones

Hello,

 

We have deployed Fortigate in Azure environment. In azure Fortigate has just 2 Interface (1 WAN, 2 LAN).

We would like to use zone for Policy. We already have several zones and use them for policy (For example VPN zones). We would like to apply zone also to LAN interface and just want to be sure that noting will be affected during this procedure (of course if there is no any misconfigurations). Are there any coveats from azure side for Azure-fortigate?

1 Solution
lgupta
Staff
Staff

Hello 1mm,

Thank you for reaching out.

 

You can put the LAN interface into a new Zone. You don't need to change anything on the Azure side as it is a local setting used only for reference/calling purposes in the FortiGate.

 

Thank you so much.

 

Best regards,

-lgupta



If you feel the above steps helped to resolve the issue mark the reply as solved so that other customers can get it easily while searching on similar scenarios.

View solution in original post

1 REPLY 1
lgupta
Staff
Staff

Hello 1mm,

Thank you for reaching out.

 

You can put the LAN interface into a new Zone. You don't need to change anything on the Azure side as it is a local setting used only for reference/calling purposes in the FortiGate.

 

Thank you so much.

 

Best regards,

-lgupta



If you feel the above steps helped to resolve the issue mark the reply as solved so that other customers can get it easily while searching on similar scenarios.
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors