Hello,
We have deployed Fortigate in Azure environment. In azure Fortigate has just 2 Interface (1 WAN, 2 LAN).
We would like to use zone for Policy. We already have several zones and use them for policy (For example VPN zones). We would like to apply zone also to LAN interface and just want to be sure that noting will be affected during this procedure (of course if there is no any misconfigurations). Are there any coveats from azure side for Azure-fortigate?
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello 1mm,
Thank you for reaching out.
You can put the LAN interface into a new Zone. You don't need to change anything on the Azure side as it is a local setting used only for reference/calling purposes in the FortiGate.
Thank you so much.
Hello 1mm,
Thank you for reaching out.
You can put the LAN interface into a new Zone. You don't need to change anything on the Azure side as it is a local setting used only for reference/calling purposes in the FortiGate.
Thank you so much.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1527 | |
1020 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.