Hi all
Have a strange problem with SSL VPN not answering. Have set it up multiple times on other system but only with only one WAN IP. Problem here i think is that it listens on all WAN IP's (11 Wan IPs). Everything is standard otherwise than the port (444) but the service doesn't answer. It's a FG81 running 7.2.5
Best regards
Henrik
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi @H3nrikP,
- Please run the following debug flows and try again.
di deb disable
di deb res
diagnose debug flow filter clear
di deb flow filter port 444
diagnose debug flow show function-name enable
di deb flow show iprope en
diagnose debug console timestamp enable
diagnose debug flow trace start 500
diagnose debug enable
- Run 'di deb dis' to disable the debug.
- Please also make sure you have a firewall policy configured for ssl.root to your internal network.
Regards,
It will only listen to what wan IP you have configured on the FGT. What happens when you connect to the FCT ? What is the error and the percentage that would give us more info.
Hi there
No error message, just no answer from forticlient or https://IP:444
It is enabled on that port, but as you see in the list it listens on all interfaces. I tried to connect to all of them
/Henrik
Do you see the TCP SYN packet coming to firewall? Is firewall sending a RST?
Can you check if there is any local-in-olicy configured (config firewall local-in-policy)?
Hi Suraj
Look in the thread, I have posted some stuff..
Regards
Henrik
Hi there,
Can you please try to connect to VPN and run the following commands:
diag sniffer packet any "host X.X.X.X and port 444" 4 0 l (where X.X.X.X is public IP where you coming from)
Regards,
Minh
Hi there.
The packets are arriving
@H3nrikP
Can you do a packet sniffer on WAN interface?
diag sniffer packet wan1 "host x.x.x.x port 444" 6 0 1 ----- where x.x.x.x is public IP of your client trying to connect with ssl vpn
to see the communication between host and fortigate.
Another good test would be to try to access web-mode on all IPs listed under WAN interface
I did try them all :)
Regards
Henrik
Hi @H3nrikP,
We see traffic on port 444 which means the ISP forwarded it to the FortiGate. Can you make sure there is no virtual IP configured on port 444? Please also make sure "source-address-negate" is not enabled. If it is enabled, the "source-address" must not be "all". You can run the following command to check:
show full vpn ssl setting | grep source
Regards,
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1633 | |
1063 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.