Created on
07-29-2022
06:14 AM
Edited on
07-29-2022
06:20 AM
By
Anthony_E
FortiAP does not give DHCP address in bridge mode
I have working MC-LAGS for the fortiAPs. They are therefore connected to the two Cisco switches
I am able to create an SSID in tunnel mode without any problem.
I wanted to use SSID switch mode to use the same VLAN for WIFI and wired clients, making it easier to access common printers.
When I assign the VLAN to a switch port, it works fine.
When I create a new SSID in bridge mode and assign it the same VLAN, I can connect to the SSID, but there is no DHCP for WIFI clients.
Do you have any idea what could be the problem?
Help me please
Hello Nabil,
Thank you for using the Community Forum.
I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.
Regards,
Hi Nabil,
I have found this old forum post which is treating approximately the same subject:
https://community.fortinet.com/t5/Fortinet-Forum/Bridging-SSID-via-VLANs/m-p/209561
Could you please have a look and tell me if it helped?
Regards,
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.