Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
tdh2112
New Contributor II

Any Outage if I Remove Interfaces a from Hardware Switch?

Hi All,

We have a Hardware Switch set up on our HA pair of 200F units on 7.0.12. We have Ports 1-8 assigned to the HS, but we only currently use Port 1. I would like to change the HS to only be assigned to Ports 1-4 so I can reuse 5-6 for a second HS.

What I have not been able to find an answer to is, if I remove ports 5-8 from the existing HS, will it cause any outage to the connection on Port 1 when I click OK?

Thanks!

He/Him
He/Him
1 Solution
adambomb1219
SuperUser
SuperUser

No, at least not in my experience.

View solution in original post

3 REPLIES 3
adambomb1219
SuperUser
SuperUser

No, at least not in my experience.

mle2802
Staff
Staff

Hi @tdh2112,

As long as the physical is not used and connected, there would be no impact at all. Please refer to this document for more information "https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-add-or-remove-physical-interface-fr...

Regards,
Minh

tdh2112
New Contributor II

Thanks to both of you for the info. I've now done the deed and had no reports of any outages.

He/Him
He/Him
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors