Hello,
I want to know if application control can perform SSL inspection.
Thanks
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Application sensors are based on signatures. SSL inspection is a separate profile.
HTH
d
It depends on which mode you are using. In the profile mode SSL inspection is a profile and can be selectively used in each policy. but in the NGFW mode there is no such function. The SSL inspection is selected under system settings and will be applied to the entire rule base. You cannot disable SSL inspection in the ngfw mode it has to be selected to be able to use the firewall in NGFW mode.
Sebastan
Your are confusing application and session layer. So no , not directly. As listed earlier application control IDs based on application signatures , protocol decoding or fingerprints or a combination of all three. So we can id applications no matter where the service runs at.
E.g HTTP APP-ID will id traffic base on the application Hyper Text Markup, so it will expect and id patterns for HTTP and would known the different from a FTP or Telnet or even something near similar like XML.
Ken
PCNSE
NSE
StrongSwan
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1561 | |
1034 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.