WAN Interface

[Maxy]

Hi to all,

on my Fortigate 100D i did already use the two wan1 e wan 2 interface to connect two different provider.

I'm now on the way to add another Internet connection from another provider. Can I use any of the free internal interfaces?

If so, will I be able to still use 'WAN  Link Load balancing'? Is there really a difference between the Wan and the Internal interface? If so, what are them?

Thanks in advance  for your help.

Max

[emnoc]

Yes any free port can be used, the name is just a name but I 'm using DMZ interfaces on some models for my WAN.

I believe some ports have different drivers and not all ports operate as 1000mbps which is not revelant to a FGT100D but yes the ports are  about the same  outside of the ethernet-layer2 address

For link-load or wan-virtual interface, you should be able to add it as a member. Just make sure you check any port discrepancies before adding it. ( DHCP-server, vip, fwpolicy, etc.......)

Good luck.