Netscan on 90D 95% utilization

piacas · ‎09-22-2017

90D has high CPU utilization almost all the time, using dia sys top, netscan runs at 95% almost all the time. Any ideas?

piacas · ‎10-25-2017

type disabling/unset 'device-identification-active-scan enable' on the inside interfaces

View solution in original post

Delta · ‎10-18-2017

Same issue here. Can't find anywhere to disable it.

Thought for the day: Advertising (n): the science of arresting the human intelligence for long enough to get money from it. -- Stephen Leacock.

piacas · ‎10-25-2017

type disabling/unset 'device-identification-active-scan enable' on the inside interfaces

lunhas2k4 · ‎08-11-2020

On my 60D, running 6.0.3 FORTIOS, disabling device-identification-active-scan on the internal interface solved the high CPU we were having with the netscan process taking up a lot of the CPU cycles.

Thanks Piacas.

Carlitos loves firewalls

NSE4 (5.4,6.0)

NSE5 (Fortimanager 6.0, Fortianalyzer 6.0)

NSE7 (Enterprise Firewall 6.0)

Netscan on 90D 95% utilization

Nominate a Forum Post for Knowledge Article Creation