Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Contributor II

FortiOS 7.4.3 incorrect interface utilization for SNMP on ipsec interfaces

fortiAfter upgrading to 7.4.3 my 1100E is doing something wrong when answering requests for ifoutoctets on ipsec interfaces.

Occassionaly Delta for out octets is way too high which shows an ipsec tunnel on a 40Gig interface at 90+ percent utilization while the physical 40Gig interface is reporting correctly.



Contributor II

I downgraded to 7.2.8... it is back to working like it should. Next stop...

New Contributor III

This results in the delta for outgoing octets sometimes being too large, causing IPsec tunnel load to be reported incorrectly on 40Gig interfaces while the 40Gig physical interface is reporting correct data


Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Top Kudoed Authors