Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
ISOffice
Contributor

Application Sensor Not Working

Hi All, We have a 100D Cluster (v5.0 GA Patch 3) running active-active at the edge of our wireless network. Our Internet policy is pretty standard with an Anti-Virus Profile (Flow-based), a Webfilter Profile (Flow-based), an IPS Sensor Profile and an Application Control policy applied to it. The Wefilter portion appears to work OK, that is, categories of websites we want blocked are indeed blocked. However, the Application Control policy appears to have no effect whatsoever. I have configured it to block all P2P applications, yet I can still use Vuze to download files. Also, the Application Name column in the Forward Logs is populated with ' Unknown' (with the exception of DNS). Occasionally (and quite rarely, I might add) ' HTTP.BROWSER' will appear in the Forward Logs under Application Name. Has anyone any idea as to what may be occuring here, am I missing something totally obvious? Any assistance would be much appreciated. Many thanks, JP
8 REPLIES 8
joco_ph
New Contributor

column in
have the same issue on a standalone FG100D.
wcente
New Contributor

Same with 505 on FGT60C
netmin
Contributor II

The default application detection rate on our 5.0.5 test box appears to be quite substandard as well. After having enabled logging for specified, other and unknown applications it does only occasionally show entries like Windows updates, McAfee updates, Symantec updates, browsers, etc., etc. A little bit of tweaking ' config ips global' seems to have improved this for now, but this is still to be monitored for other applications and performance. Currently we use: config ips global set algorithm high (default: engine-pick) set database extended (default: regular) set ignore-session-bytes 524288 (default should be: 204800) set hardware-accel-mode cp-only (default: engine-pick) set session-limit-mode accurate (default: heuristic) Modification depends on the used hardware and requirements of course.
ISOffice
Contributor

For info, We have just upgraded the 100D Cluster to Version 5.0 Patch Release 7 (Build 4429). This appears to have gone some way to resolving our issue. Applications are now being correctly identified and blocked where policy dictates.
Dipen
New Contributor III

For general browsing the application name will be unknown in Traffic Logs. Have you tried blocking " Social Media" and check if Facebook etc are actually blocked. Suggestions...Please go for FortiOS 5.2 where Block-page [replacement=message] has been introduced in Application Control as well fantastic for me.

Ahead of the Threat. FCNSA v5 / FCNSP v5

Fortigate 1000C / 1000D / 1500D

 

Ahead of the Threat. FCNSA v5 / FCNSP v5 Fortigate 1000C / 1000D / 1500D
Jirka1
Contributor III

Hi all, we use Fortigate 100D (v5.0, build 4429 (GA) and we also have a problem with correct detection applications. In Policy we use default-list, which is set monitoring all known and unknow applications. We still have in the log as 98% of applications " unknow" . Sometimes it detects DNS, but only sometimes. Does anyone have any idea? Thank you.
config application list
     edit " default" 
         set comment " monitor all applications" 
         set extended-utm-log enable
         set log enable
config firewall policy
     edit 25
         set srcintf " IPsec_zone" 
         set dstintf " INET" 
         set srcaddr " Branch1-LAN" 
         set dstaddr " all" 
         set action accept
         set schedule " always" 
         set service " ALL" 
         set utm-status enable
         set comments " Branch1 to INET" 
         set webfilter-profile " default" 
         set ips-sensor " default" 
         set application-list " default" 
         set profile-protocol-options " default" 
         set nat enable
         set ippool enable
         set poolname " Branch1" 
     next
 end
Dipen
New Contributor III

config application list edit " default" set comment " monitor all applications" set extended-utm-log enable set log enable config firewall policy edit 25 set srcintf " IPsec_zone" set dstintf " INET"
As told earlier for generic Browsing the application name is detected as Unknown

Ahead of the Threat. FCNSA v5 / FCNSP v5

Fortigate 1000C / 1000D / 1500D

 

Ahead of the Threat. FCNSA v5 / FCNSP v5 Fortigate 1000C / 1000D / 1500D
Nihas
New Contributor

yet I can still use Vuze to download files.
It seems they have not yet included the service in application signature. They are keep updating application signatures and whenever you get IPS databse updated, it will be available for your use. you can create a custom application signature if you have details. Or you can ask Fortiguard team to make it done ( globally) through the below link http://www.fortiguard.com/encyclopedia/applications/appform.html
Nihas [\b]
Nihas [\b]
Labels
Top Kudoed Authors