web-based manager vs CLI

[wess]

Hi all I have 2 fortigates - FGT80C_v4.0 (MR1 Patch 7) - FGT80C_v4.0 (MR3 Patch 15) On the first one I can set the load balance via the web-based manager, but on the second I have a different menu called " Firewall Objects" where I don' t see the section " Load Balance" How could I activate it ? I tried via CLI command, so I added this VIP but I don' t see it on the web-based manager! config firewall vip edit " SITDTV_83_84_443" set type server-load-balance set extip x.x.x.x set extintf " wan1" set server-type tcp set ldb-method first-alive set extport 443 config realservers edit 1 set ip x.x.x.x set port 443 next edit 2 set ip x.x.x.x set port 443 next end next end Any idea! how can I set the load balance via the web-based manager. Thanks for your help

[JavBsd]

Hi Wess, Have the same issue in FGT110C_V5.0.7. Like you, I made it via CLI. Maybe someone can explain us what' s happening. Greetings. Jav.

[rwpatterson]

In v4, MR3 and above you have to enable some settings. See the attached picture. Bob

[ede_pfau]

In CLI:

 config system global
 set gui-load-balance enable

Was introduced in 4.3 (v4 MR3) and is still available in v5.

[wess]

Thank you all for your help