Hi,
Can someone help me on this? my server reach gw, traceroute result not showing any hops.. Policy is open to all
note: Server (10.3.131.150) is directly connected to FW with int ip 10.3.131.1
PS C:\Users\Administrator> ping 10.2.203.10
Pinging 10.2.203.10 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 10.2.203.10:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
PS C:\Users\Administrator> tracert 10.2.203.10
Tracing route to 10.2.203.10 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
----firewall---
fwmalaz # execute ping-options source 10.3.131.1
fwmalaz # execute ping 10.2.203.10
PING 10.2.203.10 (10.2.203.10): 56 data bytes
64 bytes from 10.2.203.10: icmp_seq=0 ttl=255 time=0.3 ms
64 bytes from 10.2.203.10: icmp_seq=1 ttl=255 time=0.1 ms
64 bytes from 10.2.203.10: icmp_seq=2 ttl=255 time=0.1 ms
64 bytes from 10.2.203.10: icmp_seq=3 ttl=255 time=0.1 ms
64 bytes from 10.2.203.10: icmp_seq=4 ttl=255 time=0.1 ms
--- 10.2.203.10 ping statistics ---
5 packets transmitted, 5 packets received, 0% packet loss
round-trip min/avg/max = 0.1/0.1/0.3 ms
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
edit 26
set name "dmz_ser"
set uuid f809eafa-77ce-51ee-dab6-501fdc9dfb27
set srcintf "port4"
set dstintf "port1"
set action accept
set srcaddr "dmz-server" -- 10.3.131.150
set dstaddr "all"
set schedule "always"
set service "ALL"
set logtraffic all
-----
edit 28
set name "101-dmz"
set uuid 1c5bcb92-6c0a-51ee-1b60-62d3263302e0
set srcintf "port1"
set dstintf "port4"
set action accept
set srcaddr "all"
set dstaddr "all"
set schedule "always"
set service "ALL"
set logtraffic all
Hello,
Please check FW policy 26, there the source is dmz-server with IP address 10.3.131.150 , but if you check the sniffer, the source is 10.3.131.150 and destination is 10.2.203.10 . Try to swap the source/destination on policy 26.
Best regards,
Fortinet
Hi Bro,
i already try to make this all for source and dst before but no luck. as suggested i make it all now and i will also try to swap it.
edit 26
set name "dmz_ser"
set uuid f809eafa-77ce-51ee-dab6-501fdc9dfb27
set srcintf "port4"
set dstintf "port1"
set action accept
set srcaddr "all"
set dstaddr "all"
set schedule "always"
set service "ALL"
set logtraffic all
next
Hello,
The weird thing is that why server 10.3.131.150 is not able to reach 10.3.131.1 on traceroute. as show below hop.
PS C:\Users\Administrator> tracert 10.2.203.10
Tracing route to 10.2.203.10 over a maximum of 30 hops
1 * * * Request timed out.
2 * * * Request timed out.
3 * * * Request timed out.
4 * * * Request timed out.
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
Is ping service enabled on the Firewall interface, if not can you enable it and test again?
Yes, ping is enable.. and to give further history on this.. it was working perfectly for week but suddenly start acting this way. just started yesterday so idk if this is a bug or something. Weird thing is that its not provided next hop even 1st hop 0 respond. 1st hop suppose to be gw.
Can you confirm the FortiOS version? We may be hitting
https://docs.fortinet.com/document/fortigate/7.0.8/fortios-release-notes/289806/resolved-issues
830823 |
Traffic is dropped intermittently by the implicit deny policy, even though there is a valid policy on the FortiGate. |
832217 |
Traffic is hitting the implicit deny policy when changes are made to a policy. |
Created on 11-01-2023 03:59 AM Edited on 11-01-2023 04:02 AM
Hi,
thanks for the info, i'll check on this. my fw version 7.0.13
7.0.13 is not affected by these bugs, so it must be something else.
Dears,
Your help on this is highly appreciated.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1733 | |
1106 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.