Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Suh_Ahamed
New Contributor

Transparent Mode with Three WAN Connection

Hello techies,


We have requirements to configure the firewall without changing the IP addresses on the existing infra.

We have a plan to configure the Firewall in Transparent Mode.


The attached Scenario is possible? and any one implemented the below scenario?

 

TP MOde-2.png

4 REPLIES 4
AEK
SuperUser
SuperUser

Hello Ahmed

Your design is correct.

AEK
AEK
dbu
Staff
Staff

Hello @Suh_Ahamed ,
Yes it is possible. Usually in transparent mode the firewall does not change the packets, but only inspecting the flow. 
Here is a useful handbook to help you in your configuration . 

https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/5aa37c8a-1a11-11e9-9685-f8bc12...

Regards!
If you have found a solution, please like and accept it to make it easily accessible for others.
Suh_Ahamed
New Contributor

Hello techies,

 

The below solution will create a layer 2 loop ?

or it's possible in the FortiGate firewall with TP mode.

 

Screenshot -14.png

 

AEK

AEK
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors