Hello, We have use case to create an IPSec tunnel from the Fortigate
100F firewall to the remote end Cisco Router at three different
locations. ( Point to multiple point ) . We have a single Public IP
address for the WAN (/30). Please advise it is po...
Dear techies, As per the below topology, does either both VDOM need to
connect to the Internet for the Signature update, or does Root VDOM (
NAT mode ) only require an Internet connection? Please advise.This is a
feasible Solution?We can't change the...
Hello techies,We have requirements to configure the firewall without
changing the IP addresses on the existing infra.We have a plan to
configure the Firewall in Transparent Mode.The attached Scenario is
possible? and any one implemented the below sce...
Hello Dears,We have requirements to configure the firewall without
changing the IP addresses on the existing infra.We have a plan to
configure the Firewall in Transparent Mode.1) The customer has a flat
network, From the core switch is the gateways t...
Thanks for your response. We have a plan to connect all three gateway
routers to the Firewall an WAN port ( 3 three WAN & one LAN ports as per
the diagram.
