Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
natan
New Contributor

Switch not registered after fortigate upgrade

Hi, 
What could be the reason that the switch appears not registered after updating a version to FW? to 7.4.3

msedge_rtShRLyNN8.jpgmsedge_FPolwQHvIo.jpgmsedge_Ffho0MRSB6.jpg

1 Solution
hbac

Hi @neolgs,

 

It matches a bug ID 0984404. It will be fixed in later version. 

 

Regards, 

View solution in original post

3 REPLIES 3
ebilcari
Staff
Staff

The registration status of the switch should not be related directly to the FGT firmware version, was this a temporarily issue or is still occurring?

Based on Fortilink compatibility matrix the recommended version of FSW for FGT running 7.4.3 is 7.4.2.

- Emirjon
If you have found a solution, please like and accept it to make it easily accessible for others.
neolgs
New Contributor

I have the exact same issue since 7.4.2 and even after upgrading to 7.4.3 firewall OS not the switch OS wich is still on 7.4.2 the switchs show as not registered but if you hit refresh they go to registered status until you exit the gui and back to the gui its back to not registered.

hbac

Hi @neolgs,

 

It matches a bug ID 0984404. It will be fixed in later version. 

 

Regards, 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors