Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
hassan4mz
New Contributor

SSL VPN routing back Fortigate to fortigate (site to site )

Greetings!

kindly as Example in the link bolw i try to connect Fortigate to fortigate (site to site ) via ssl-vpn

(isp is blocking the ipsec)

the issue is i can't reach the forti ssl vpn client subnet as picture below

https://docs.fortinet.com/document/fortigate/7.0.0/new-features/508779/fortigate-as-ssl-vpn-client

 

forigate.png

 

this is debug  with nat

___________________________________

id=65308 trace_id=501 func=print_pkt_detail line=5895 msg="vd-root:0 received a packet(proto=1, 41.XX.XXX.XXX:60419->22.0.0.2:2048) tun_id=0.0.0.0 from vpn2. type=8, code=0, id=60419, seq=5983."
id=65308 trace_id=501 func=init_ip_session_common line=6076 msg="allocate a new session-001225cf, tun_id=0.0.0.0"
id=65308 trace_id=501 func=vf_ip_route_input_common line=2605 msg="find a route: flag=80000000 gw-22.0.0.2 via root"
id=65308 trace_id=501 func=fw_local_in_handler line=522 msg="iprope_in_check() check failed on policy 0, drop"

______________________________________

this is debug  without  nat

id=65308 trace_id=505 func=print_pkt_detail line=5895 msg="vd-root:0 received a packet(proto=1, 192.168.75.113:3->22.0.0.2:2048) tun_id=0.0.0.0 from vpn2. type=8, code=0, id=3, seq=5994."
id=65308 trace_id=505 func=init_ip_session_common line=6076 msg="allocate a new session-00122799, tun_id=0.0.0.0"
id=65308 trace_id=505 func=vf_ip_route_input_common line=2605 msg="find a route: flag=84000000 gw-22.0.0.2 via root"
id=65308 trace_id=505 func=fw_local_in_handler line=522 msg="iprope_in_check() check failed on policy 0, drop"

 

thank you

2 REPLIES 2
Yurisk
SuperUser
SuperUser

"check failed on policy 0, drop"" basically means that there is no matching Security rule for this traffic. The example you use mentions creating policy in one direction only - from VPN SSL client to the other side. For bidirectional traffic you will need to create a mirrored security policy as well, with (as per example):

 

Incoming Interface: sslclient_port1

Outgoing interface: port2

Yuri https://yurisk.info/  blog: All things Fortinet, no ads.
Yuri https://yurisk.info/ blog: All things Fortinet, no ads.
hassan4mz
New Contributor

I did already in policy in and out but still same issue i think the problems in ssl-vpn interface (client ) not reverse the route

 

ssl.jpg

 

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors