Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
MasterBratac
Contributor

SD-WAN traffic distribution

Hi folks,

 

I have a strange problem distributing traffic over sd-wan in fortios 5.6.2

We have 4 wan connections.

Two of them are 100MBit down and 40 up.

The other two are 16Mbit down and 1 up.

I entered the bandwith of each interface it's config.

All connections are bound to the sd-wan interface.

So far working fine.

 

Now i want to have the two fast interfaces used mostly.

So I set traffic volume weight 100 to the fast ones and only 5 to the slow ones.

 

Problem ist that the traffic volume still ist nearly perfectly 25% on each interface.

 

Any idea?  

Thank you!

3 REPLIES 3
Sunil_Panchal_NSE7
New Contributor III

Dear friend,

 

   what type of load balancing algorithm you are using .

if you are using weight method, you have to put 45-45 for both fast and 5-5 for slow.

they you will get proper distribution of speed and network .

 

 

 

MasterBratac

I'm using the volume weight method.

As I understood, the weight entrys are just proportions, so even 1000/1000/1/1 should do it ...

I changed now to 45/45/5/5 and will see what happens.

MasterBratac

Still the same. It's nearly exactly 25% Traffic on each interface.

Any other idea?

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors