Hi folks, I have a strange problem distributing traffic over sd-wan in
fortios 5.6.2We have 4 wan connections.Two of them are 100MBit down and
40 up.The other two are 16Mbit down and 1 up.I entered the bandwith of
each interface it's config.All conne...
Hello together, I'm trying to get my Fortigates registered via LLDP in
my Switches.This works perfectly on two FGT-50E, currently on 5.4.1.It
does not work on 3x FGT-90D and on one 110C. These are all on
5.4.somewhat firmware.What I did: edit "intern...
Hello guys, I have created a mst file for customizing forticlient setup.
If I run msiexec with the TRANSFORM Option pointing to my mst file,
every thing works. But how do I integrate this mst into a msi file ? If
I run FCRepackager.exe -m c:\FortiCli...
JasperW wrote:I upgraded my FGT201E saturday the 22nd from 6.2.4 to
6.2.5. The upgrade process went smooth. I do have problems with SSL Deep
Inspection, especially (strangely enough) on exempted addresses.In a
proxy-based policy with "ssl deep inspec...
"No matching IPsec selector, drop" is usually a problem with local and
remote networks in the ipsec phase 2.I dont know exactly how this is
configured in the FritzBox routers.You have to set up 0.0.0.0/0 as local
and remote in phase2 or create two ph...
Hi, I'm also from germany, and I know FritzBoxes ...Did you set up the
route to the other spokes lan to point at the ipsec tunnel in each
spoke?See: https://avm.de/service/fr...r-FRITZ-Box-zugreifen/
I'm using the volume weight method.As I understood, the weight entrys
are just proportions, so even 1000/1000/1/1 should do it ...I changed
now to 45/45/5/5 and will see what happens.
