Hello everyone,
I made a policy with mac address filtering on port 80 and 443 but it doesn't work. when I apply the mac address filter, the device with this mac address cannot access the services. no worries when I put on ALL.
On the other hand I made an identical policy between 2 vlan and no worries.
Why it won't work on WAN
I followed this guide https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-create-MAC-Addressed-Based-Policies...
Attached are the two screen shots of the policies in question
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi Jhnn-be,
do a packet capture:
and then see what MAC you actually receive. It is VERY unlikely that the MAC of the device will be transported over WAN.
Best regards,
Markus
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1531 | |
1028 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.