Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
davidlavender
New Contributor

Intercom with X80s

Hello, I have not found a way yet to set up intercom an extension using a prefix button. We are coming from an ESI PBX where a simple press of the extension on an interoffice call could be set to auto answer. Anyone have any luck with this? As it is, I have to program an intercom button for every extension using *92XXX where the X is the extension. This takes up a lot of real estate.

1 REPLY 1
sjoshi
Staff
Staff

Hi,

 

To set up intercom for an extension using a prefix button on FortiFone desk phones, you can program a key with the intercom feature code (*92) followed by the extension number. Unfortunately, there isn't a direct way to set up auto-answer for intercom calls with a single button press. Each extension would need a programmed intercom button using *92 followed by the extension number, which may take up more space on the phone.

 

Let us know if this helps.
Salon Raj Joshi
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors