- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Intercom with X80s
Hello, I have not found a way yet to set up intercom an extension using a prefix button. We are coming from an ESI PBX where a simple press of the extension on an interoffice call could be set to auto answer. Anyone have any luck with this? As it is, I have to program an intercom button for every extension using *92XXX where the X is the extension. This takes up a lot of real estate.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
To set up intercom for an extension using a prefix button on FortiFone desk phones, you can program a key with the intercom feature code (*92) followed by the extension number. Unfortunately, there isn't a direct way to set up auto-answer for intercom calls with a single button press. Each extension would need a programmed intercom button using *92 followed by the extension number, which may take up more space on the phone.
Fortinet Certified Expert (FCX) | #NSE8-003459
