Hi all,
I have 2 ISP WAN links - WAN1 and WAN2. My intention is to let users on subnet A route via WAN2 and all other users via WAN1. According to the FortiOS Handbook and other info i find online, I should be able to configure policy routing (based on source IP subnet), but no matter whether through GUI or CLI, i cannot find this option on my Fortigate 60D. My Fortigate is currently on v5.4.3 build 1111.
I go to Network --> Routing and all i can create are static routes based on destination IP. Can someone guide me on what do i need to enable to allow me to do policy based routing? Thanks!
Hello Frogmist ,
For PBR we need to do first setup WAN1 & WAN2 distance and priority are same.
To enable this feature go to System -> Feature Select -> select Advanced Routing (under the Basic Feature)& apply the settings.
In cli
config router policy edit 1 set input-device "internal" set src "x.x.x.x " -------------> Internal Subnet set dst "0.0.0.0/0.0.0.0" set gateway Y.Y.Y.Y -------------> WAN set output-device "wan2"
end
Regards,
Sudarsan Babu P
Regards,
Sudarsan Babu P
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.