Hello Expert,
I configured a Stitch to backup our Fortigates firewall to an solarwinds tftp server.
But I notice once the backups are completed for a week it is not running automatically for the next week.
I did some troubleshooting and found that last trigger date and next scheduled trigger is same.
Unsure if this is preventing the backup from running at the next appointed time.
I humbly request some help .
Please results before for guidance .
Guy-Head-Office-1 # diagnose test application autod 3
alert mail log count: 0
stitch: Weekly_backups_to_TFTP (scheduled)
local hit: 0 relayed to: 564 relayed from: 564
last trigger: last relay:Sun Feb 9 14:08:41 2025
next scheduled trigger:Sun Feb 9 14:30:00 2025
actions:
Upload Backup config to Tftp Server:
done: 564 relayed to: 564 relayed from: 564
last trigger: last relay:Sun Feb 9 14:08:41 2025
Thank you
Regards
Guy-Head-Office-1 # config system automation-stitch
edit "Weekly_backups_to_TFTP"
set description ''
set status enable
set trigger "Weekly_Backup"
config actions
edit 1
set action "Upload Backup config to Tftp Server"
set delay 360
set required enable
next
end
set destination "daily_backups" "daily_backups1"
next
end
Guy-Head-Office-1 (Weekly_Backup) # show
config system automation-trigger
edit "Weekly_Backup"
set trigger-type scheduled
set trigger-frequency weekly
set trigger-weekday sunday
set trigger-hour 14
set trigger-minute 30
next
end
Hi @jomof ,
Configurations look good.
Is it possible for you to provide all related automation stitch configurations so I can test it locally?
config system automation-stitch
edit "Weekly_backups_to_TFTP"
set trigger "Weekly_Backup"
config actions
edit 1
set action "Upload Backup config to Tftp Server"
set delay 360
set required enable
next
end
set destination "daily_backups" "daily_backups1"
next
end
config system automation-trigger
edit "Weekly_Backup"
set trigger-type scheduled
set trigger-frequency weekly
set trigger-weekday sunday
set trigger-hour 14
set trigger-minute 30
next
end
config system automation-action
edit "Upload Backup config to Tftp Server"
set action-type cli-script
set minimum-interval 1
set script "exec backup full-config tftp %%log.devname%%.cfg xxx.ppp.10.32"
set execute-security-fabric enable
set accprofile "super_admin"
next
end
Regards
Hi @jomof ,
I used your configurations, only changed the TFTP server and scheduled time, got the following:
stitch: Weekly_backups_to_TFTP (scheduled)
local hit: 1 relayed to: 1 relayed from: 0
last trigger:Sun Feb 16 09:30:13 2025
last relay:
next scheduled trigger:Sun Feb 23 09:30:00 2025
actions:
Upload Backup config to Tftp Server:
done: 1 relayed to: 1 relayed from: 0
last trigger:Sun Feb 16 09:30:13 2025
last relay:
I would recommend you delete and recreate the stitch for a try.
User | Count |
---|---|
2101 | |
1185 | |
770 | |
451 | |
344 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.