How can I tell how many clients are connected via WPA2 and how many via WPA3 ?

[shlomim]

Hi,

I have 40F as Wireless Controller, with 831F APs connected to it via POE switch.

How can I see which clients were connected via WPA3 PAE and which with WPA2 PSK ? 
I'm running the SSID in transition mode.

[Dhruvin_patel]

Greetings!

To determine the number of clients connected via WPA2 PSK and WPA3 SAE on your FortiGate wireless controller, follow these steps:

1. Log in to the FortiGate GUI.
2. Navigate to the WiFi Controller section.
3. Access the Wireless Controller Monitor to view the connected clients.
4. Look for the connected clients and check their authentication methods.
5. Clients connected via WPA2 PSK will be using WPA2 authentication, while clients connected via WPA3 SAE will be using WPA3 authentication.
6. Identify the number of clients connected under each authentication method to differentiate between WPA2 and WPA3 connections.

By following these steps, you can determine how many clients are connected via WPA2 PSK and how many are connected via WPA3 SAE on your FortiGate wireless controller with the specified setup.

Regards!