Can i configure wan static ip from my modem ip's ?????
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello
please refer to the document to configure WAN Interface Static IP
It is unclear what you are asking. The FortiGate supports setting a static IP on any interface.
If you are behind an ISP modem and that is giving you a private address, you would probably need to set it to bridged mode and that will give you the correct WAN IP directly on the FortiGate.
Whether or not that will be static depends on your ISP.
Sounds like...you have multiple static IPs from your ISP and currently terminated at the modem/router from the ISP. And, you want to utilize one of them at your 40F behind the modem. Is that what you intended to say?
If so we need to know the subnet mask you got, or multiple public subnets.
Toshi
Hello again
With DHCP to WAN i don't have problem can i use a static IP from internal pull as a WAN of Corse out from DHCP range
Thx
The wan interface pulls one IP via the modem likely in a /30 subnet, which probably a public IP from the ISP. If you have additional public subnet like a /29 from the ISP, you can configure it on the LAN side. Is that what you have?
Toshi
Thx Toshi
I resolve my problem !!!!!
You solved my problem also, thank you so much for your help.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1666 | |
1077 | |
752 | |
446 | |
220 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.