Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
wotik
New Contributor III

Fortianalyzer - "Source" format in "Traffic"

Hello

How can I change the format of the "Source" value in "Log view" -> "FortiGate" -> "Traffic" from e.g. "0d42e9ab-05es-4202-bg6a-7r937cstff36" to an IP address? Some of the endings are represented by an IP address, and some by such an identifier as above. What it comes from?

001.png

 

 

Best Regards,
Wojtek
Best Regards,Wojtek
1 Solution
srajeswaran

Can you try the auto-script configuration?

 

Ref: https://community.fortinet.com/t5/FortiGate/Technical-Tip-The-unit-detection-identification-data-do-...

Regards,

Suraj

- Have you found a solution? Then give your helper a "Kudos" and mark the solution.

View solution in original post

12 REPLIES 12
wotik
New Contributor III

Hello,

 

Is disabling device identification/detection from the interface still related to anything (what changes will it introduce in my FG)?

Best Regards,
Wojtek
Best Regards,Wojtek
srajeswaran

Device detection and identification feature is creating a database of disovered devices in the memory of the FortiGate unit.

The data collected by device detection is to simplify the monitoring/reporting using the hostnames/OS etc.

You can find more details on this on below URL.

 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-Enable-Device-Detection-to-allow-FortiOS-t...

Regards,

Suraj

- Have you found a solution? Then give your helper a "Kudos" and mark the solution.

wotik
New Contributor III

Hello,

From what I can see, I think everything is ok. I think we've exhausted the topic.

Best Regards,
Wojtek
Best Regards,Wojtek
Top Kudoed Authors