FortiAP431F OIDS

[nolanm]

I'm setting up PRTG to monitor my network, I'm looking for the OIDs for the FortiAP431F to monitor CPU load and memory util. I saw another post on which a user gave a base OID(1.3.6.1.4.1.12356.101.14.4.4.1.20 for CPU load or 1.3.6.1.4.1.12356.101.14.4.4.1.21 for memory util)  to which I should add on 1.16.(Serial Number in ASCII decimal values). This doesn't work, I was wondering if anyone else has had similar issues and figured out either how to make those work or the correct OIDs? My AP is using os version 7.2.5

[AEK]

Hi Nolan

I have a FortiAP F series in my lab, I'll see if I can extract anything useful for your request.

[Anthony_E]

Thanks a ton Abdelkrim.

[AEK]

It's my pleasure Anthony.

[AEK]

Hi Nolan

Following my tests I couldn't find any related OID on the MIB nor on SNMP walk output.
So my personal deduction is that there is no such OIDs.

[nolanm]

I'm starting to come to the same conclusion although I'm not giving up yet. 

[AEK]

Following deeper tests I think I've found it (with 99% certitude).

snmpwalk -v2c -c public  172.16.1.1  1.3.6.1.4.1.12356.101.14.4.4.1
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpId.1."FP221ETF1804****" = STRING: FP221ETF1804****
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpIpAddressType.1."FP221ETF1804****" = INTEGER: ipv4(1)
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpIpAddress.1."FP221ETF1804****" = Hex-STRING: AC 14 00 14 
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpLocalIpAddressType.1."FP221ETF1804****" = INTEGER: ipv4(1)
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpLocalIpAddress.1."FP221ETF1804****" = Hex-STRING: AC 14 00 14 
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpBaseMacAddress.1."FP221ETF1804****" = STRING: 70:4c:a5:fb:1f:60
FORTINET-FORTIGATE-MIB::fgWcWtpSessionConnectionState.1."FP221ETF1804****" = INTEGER: onLine(2)
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpUpTime.1."FP221ETF1804****" = Timeticks: (15324300) 1 day, 18:34:03.00
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpDaemonUpTime.1."FP221ETF1804****" = Timeticks: (15316300) 1 day, 18:32:43.00
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpSessionUpTime.1."FP221ETF1804****" = Timeticks: (15279900) 1 day, 18:26:39.00
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpProfileName.1."FP221ETF1804****" = STRING: FAP221E-default
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpModelNumber.1."FP221ETF1804****" = STRING: FP221E
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpHwVersion.1."FP221ETF1804****" = STRING: 0
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpSwVersion.1."FP221ETF1804****" = STRING: FP221E-v6.4-build0437
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpBootVersion.1."FP221ETF1804****" = STRING: 04000002
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpRegionCode.1."FP221ETF1804****" = STRING: I 
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpStationCount.1."FP221ETF1804****" = Gauge32: 4
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpByteRxCount.1."FP221ETF1804****" = Counter64: 2742501968
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpByteTxCount.1."FP221ETF1804****" = Counter64: 3042708657
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpCpuUsage.1."FP221ETF1804****" = Gauge32: 3
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpMemoryUsage.1."FP221ETF1804****" = Gauge32: 65
FORTINET-FORTIGATE-MIB::fgWcWtpSessionWtpMemoryCapacity.1."FP221ETF1804****" = Gauge32: 235224

The two bold lines are CPU and memory usage (resp.) of my first AP (FAP221E). I'm confirming this info with 99.9% certitude according to my tests.

Hope it helps.

[nolanm]

I'm not familiar with the syntax, how would I convert those lines to an OID? Also what is that screenshot from? 

[AEK]

Hi

Your AP is managed, then you send the query to FG IP, like this:

snmpwalk -v2c -c <community-name> <FG-IP> 1.3.6.1.4.1.12356.101.14.4.4.1

[AEK]

Here is the exact ones you need, with snmpget.

$ snmpget -O n -v2c -c public 172.16.1.1  .1.3.6.1.4.1.12356.101.14.4.4.1.20.1.16.70.80.50.50.49.69.84.70.49.56.48.52.56.52.54.50 
.1.3.6.1.4.1.12356.101.14.4.4.1.20.1.16.70.80.50.50.49.69.84.70.49.56.48.52.56.52.54.50 = Gauge32: 3 

$ snmpget -O n -v2c -c public 172.16.1.1  .1.3.6.1.4.1.12356.101.14.4.4.1.21.1.16.70.80.50.50.49.69.84.70.49.56.48.52.56.52.54.50 
.1.3.6.1.4.1.12356.101.14.4.4.1.21.1.16.70.80.50.50.49.69.84.70.49.56.48.52.56.52.54.50 = Gauge32: 65

So if I'm not wrong, the  .1.3.6.1.4.1.12356.101.14.4.4.1  is my first FAP, and the rest is for CPU/RAM usage values.

Hope it helps.

[nolanm]

I included that in my original post, I tried these and added on add on 1.16.(Serial Number in ASCII decimal values). It didn't return anything.