Hi,
I'm trying to graph the CPU and memory usage of the FortiAP 431F. (managed by FortiGate). I checked the MIB that is downloadable over Support page (i.e. FORTINET-CORE-MIB, FORTINET-FORTIAP-MIB) but it does not contain CPU and memory OID. Any pointers/assistance is greatly appreciated.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi - i'm using snmp to monitor FortiAPs managed by FGTs (mostly FGT300E 6.0.12).
I use FORTINET-FORTIGATE-MIB and I think there are paths you are looking for:
fortinet(12356).fnFortiGateMib(101).fgWc(14).fgWcWtpTables(4).fgWcWtpSessionTable(4).fgWcWtpSessionEntry(1).fgWcWtpSessionWtpCpuUsage(20)
fortinet(12356).fnFortiGateMib(101).fgWc(14).fgWcWtpTables(4).fgWcWtpSessionTable(4).fgWcWtpSessionEntry(1).fgWcWtpSessionWtpMemoryUsage(21) OID: 1.3.6.1.4.1.12356.101.14.4.4.1.20 (or 21 for memory) This is a column OID so to get value for one AP (WTP) you must add ID of that AP to the OID above. Default ID of AP is its serial number - it must be written as TypeLenValue format (type in this case is string - code 1). For example: WTPID of AP with serial number: "FP221ETF19906655" is: 1.16.70.80.50.50.49.69.84.70.49.57.57.48.54.54.53.53 because: 1 = typecode of value WTPID (1 = string) 16 = len of value WTPID = len of string "FP221ETF19906655" 70.80.50.50.49.69.84.70.49.57.57.48.54.54.53.53 = string "FP221ETF19906655" as ASCII codes (decimal) ("F"=70,"P"=80,"2"=50 etc). So: if you want to get cpu usage for AP with serial number, for example: FP221ETF19906655 you should query Fortigate for value of this OID: 1.3.6.1.4.1.12356.101.14.4.4.1.20.1.16.70.80.50.50.49.69.84.70.49.57.57.48.54.54.53.53 and for memory usage: 1.3.6.1.4.1.12356.101.14.4.4.1.21.1.16.70.80.50.50.49.69.84.70.49.57.57.48.54.54.53.53 L
Hi leszek, thanks for the answer and additional information re conversion. I also got the OID information from Fortinet TAC. However, I also want to monitor the AP directly via SNMP, do you know the OID?
I am also searching for that MIB to monitor CPU and RAM of FortiAPs.
Using the SNMP traps for high memory/cpu is not really an option for my usecase.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1546 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.