Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
VicAndr
New Contributor III

FortiAP-321C on FortiOS 5.2.2?

We plan to buy a number of newest FortiAP-321C WiFi access points to connect to different FortiGate units (all with FortiOS 5.2.2) deployed at our various locations. Unfortunately even with the latest FortiOS 5.2.2, FortiAP-321C is not available as a supported platform on a Fortigate's built-in WiFi Controller.

 

Does anyone know if we may specify FAP-320C platform (which seems to be close) to work with FAP-321C? Did anyone actually tried that?

 

VA

2 REPLIES 2
Bromont_FTNT
Staff
Staff

The 321C should be present on 5.2.2, what Fortigate platform are you using? Also try the following at CLI:

 

#config wireless-controller wtp-profile

#edit 321C_AP

#config platform

#set type 321C

#end

#end

 

Dave_Hall
Honored Contributor

Currently running the older wireless controller version of the 5.0.8 firmware on a 200D -- I'm going to assume these new wireless controllers were finally merged into the mainstream 5.2.x firmware.  A clean/factory config should show the 321C supported under the AP profile settings.

 

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C

NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors