Firmware "Disappear" When Upgrading Firewall?

[BusinessUser]

Hi,

When I run "diag sys flash list" on the firewall, it only shows version 7.0.x.

However my current firewall firmware version is 7.2.x.

Why is the current firewall firmware version not stored in the harddisk partition?

So where has it disappeared to?

[btey]

Hi BusinessUser,

For sys flash list, example as below:

xxxx-6.00-FW-build0272 <<<<<Version 6.0
xxxx-6.02-FW-build1142 <<<<<Version 6.2
xxxx-7.00-FW-build0444 <<<<<Version 7.0
xxxx-7.02-FW-build1517 <<<<<Version 7.2

Please confirm if you see 7.02 and do compare the build number.

Thank you.

[BusinessUser]

Ok I see it.

But why is version 7.2 not starting with 7.2 instead?

[btey · Accepted solution]

Hi BusinessUser, 

That is the naming convention in the flash partition. 

Please refer to the build number for confirmation.

Thank you.