Dear all,
I use 200E how can i blok ultraviewer (as teamviewer). Link https://ultraviewer.net
Thank so much
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hi,
You can do it through web filter ...Block below category you may stop this .
Category:General Interest - Business
Sub-Category:Remote Access Regds Ashik> Goto "Policy & Objects" section or the application control policy configuration page.
> Create a new application control policy with the following settings:
https://docs.fortinet.com/document/fortigate/6.2.14/cookbook/302748/application-control
Thanks,
Hello,
You may consider to use application control to block ultraviewer application (deep inspection is not required).
https://www.fortiguard.com/appcontrol/48424
To block Ultraviewer on your Fortinet firewall, you can create a firewall policy to block traffic to and from the Ultraviewer application. Here are the steps to do so:
1. Create a new firewall address for Ultraviewer. Go to Policy & Objects > Addresses and click Create New. Enter a name for the address (e.g. Ultraviewer), and enter the IP address or range of addresses associated with Ultraviewer.
2. Create a new firewall service for Ultraviewer. Go to Policy & Objects > Services and click Create New. Enter a name for the service (e.g. Ultraviewer), and enter the port number or range of port numbers associated with Ultraviewer.
3. Create a new firewall policy to block traffic to and from Ultraviewer. Go to Policy & Objects > IPv4 Policy and click Create New. Set the Source and Destination to the appropriate values (e.g. Any for Source and Ultraviewer for Destination). Set the Service to the Ultraviewer service you created in step 2. Set the Action to Deny.
4. Save the new firewall policy.
By following these steps, you can block Ultraviewer on your Fortinet firewall. Note that this will block all traffic to and from Ultraviewer, so if you need to allow certain traffic you will need to create additional firewall policies to allow that traffic.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1673 | |
1083 | |
752 | |
446 | |
226 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.