Allow One IP to Remotely Browse through Site-to-Site
Hey everyone!
I have a site-to-site VPN between two locations. Is there a way I can pass only one IP address through for remote browsing. For example, I have a subnet of 10.0.0.0/24 on FW A that can access all internal resources on FW B (example subnet of 10.1.1.0/24). I have one workstation (10.0.0.50) on FW A that would need to access the internet through FW B. The rest of the network would still access the internet through FW A. I tried using this KB https://community.fortinet.com/t5/FortiGate/Technical-Tip-Remote-browsing-over-IPSec-VPN-tunnel/ta-p... but am unable to get what I need to work. Any help with this would be greatly appreciated!
I believe your default route is pointing to wan2 which is why it doesn't match the policy route. You will need another static route and point it to the IPSec tunnel. You can create a static route for 8.8.8.8 for testing and point it to the IPSec tunnel. After that, run the debug flow again.
