i have un fortigate 60d , i removed the cisco switch to manage everything from the firewall. on the cisco switch I had ports in access mode, is it possible to have the same configuration on the firewall ports?
i have configurated hardware switch and free internal
but i can't put internals in access mode on a specific vlan like normal cisco switches. example I have a device that I cannot set the vlan but I have wired on my fortigate and not being on the vlan specification it is not reached by other devices
I wonder then why the hardware switch function. I'm trying
set vdom "root"
set ip 172.25.40.254 255.255.255.0
set allowaccess ping
set alias "QNAP"
set device-identification enable
set role lan
set type physical
set snmp-index 20
set vlanid 40
but when i try the command set vlanid 40 show error
Your attached images are broken. But the hard-switch "config sys virtual-switch" is to have the same set of non-tag + VLANs on a set of multiple physical ports. Then it becomes a single port for configuration.
The 60D will not support "virtual-switch-vlan", (access mode).
Reach out to the fortinet support and ask which models and OS supports the "virtual-switch-vlan". You probably need a newer/bigger model for that, I know it is working on 100E, 100F and 300E as I have configured it myself.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.