extend/modify an existing interface/VLAN (IP/Mask/DHCP)

[grosmain]

I ran out of adresses in the DHCP scope of my working guest network. The current config is Class C: 192.168.66.254/255.255.255.0 DHCP Scope is .1 to .252 DNS: IF-IP I changed IP/Mask to 10.19.66.1/255.255.248.0 I deleted the DHCP scope. I created a new scope and accepted the default result. I changed the subnet mask to 255.255.248.0 I changed DNS to specific and used 8.8.8.8 Clients receive correct addresses but can't access internet anymore. What am I missing here? Thank You!

[ede_pfau]

You probably need to change your default route as well, I mean, the "default gateway" setting in the DHCP server settings. You can check that quickly on a client with "ipconfig -all".

Your scenario is the best example why the router should always get the .1 address in it's LAN address space. For example, if 192.168.66.1/24 is your LAN port's address, then changing that to 192.168.66.1/23 would double the address space from .66.2 to .67.254. Without any changes to the FGT required.

[grosmain]

This is a natted VLAN (one of many, all are working all are using .254 in their respective SN). Gateways are allways IF IP, DNS Servers as well. There is only one static route 0.0.0.0/0 -> SDWAN.

I agree that using .1 as GW is nice but I got to work on an existing system and can't change the LAN-Port at the moment.

[grosmain]

solved:

IP/Netmask:: 10.19.71.254/255.255.248.0 DHCP Scope: 10.19.64.1 to 10.19.71.253 DNS: 8.8.8.8