Hello,
I was suggested that I test the following commands:
config firewall settings
set sip-helper disable
set default-voip-alg-mode kernel-helper-based
end
However I get that the command isn't recognized for config firewall settings.
This is on a FortiWifi 30E running 5.6.5.
How can I disable the sip-helper on this OS version?
@Fortinet - Please for the love of god, update your website documentation for each version. 5.6+ Has a completely different interface and a lot of commands have changed. Makes the documentation almost useless. So frustrating.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I actually resolved this issue this morning.
Turns out I need to now use "config system settings" then the remaining commands worked.
Cheers.
Have you tried the following:
config system settings
set sip-helper disable
set default-voip-alg-mode kernel-helper based
end
I actually resolved this issue this morning.
Turns out I need to now use "config system settings" then the remaining commands worked.
Cheers.
Have you tried the following:
config system settings
set sip-helper disable
set default-voip-alg-mode kernel-helper based
end
padraig2392 wrote:Have you tried the following:
config system settings
set sip-helper disable
set default-voip-alg-mode kernel-helper based
end
Thank you, yes I tried all of those, spend 4 hours on a support call with Fortinet, we checked everything, and for the most part, we had literally every SIP/VOIP affecting service turned off. I then noticed 2 days ago, that our traffic shaping policy I had only applied the guaranteed bandwidth on the Shared Shaper, not on the Reverse Shaper. I have since applied a guaranteed shaper in both directions, as well as applied a per-IP max bandwidth that is more than enough for a VOIP call (Polycom hard phone), and the total amount of phones add up to less than my guaranteed setting. Since having done that change, it seems like my problem has stopped happening (also improved jitter on all calls from that location).
Nowhere does it recommend/suggest this in FortiNet's documentation, but it seems to have helped.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.