There is no bgp or ospf configuration in routing table

[goutham28404]

: that there is no bgp or ospf configuration in routing table :
LPA-HALLES-FW100F-01 # get router info routing-table all Codes: K - kernel, C - connected, S - static, R - RIP, B - BGP O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area V - BGP VPNv4 * - Routing table for VRF=0
S* 0.0.0.0/0 [200/0] via 192.168.14.240, wan1, [2/0]
C 10.0.255.0/29 is directly connected, parc.bonnel
C 10.1.255.0/24 is directly connected, boucle1.bleu
C 10.2.255.0/24 is directly connected, boucle2.rouge
C 10.3.255.0/24 is directly connected, boucle3.jaune
C 10.4.255.0/24 is directly connected, boucle4.violet
C 10.5.255.0/24 is directly connected, boucle5.vert
C 10.100.255.0/24 is directly connected, interco.siege
C 10.200.255.0/24 is directly connected, interco.halles
C 10.255.0.248/29 is directly connected, interco.fs1048e
C 10.255.11.0/24 is directly connected, nac_segment
S 37.58.179.120/32 [10/0] via 192.168.28.1, IRVE Primaire, [1/0]
S 91.103.232.128/26 [10/0] via 192.168.28.1, IRVE Primaire, [1/0]
C 169.254.1.0/24 is directly connected, fortilink
C 169.254.11.0/24 is directly connected, quarantine
C 169.254.12.0/24 is directly connected, voice
C 169.254.13.0/24 is directly connected, video
C 169.254.14.0/24 is directly connected, rspan
C 169.254.15.0/24 is directly connected, onboarding
C 192.168.14.0/24 is directly connected, wan1
C 192.168.28.0/24 is directly connected, IRVE Primaire
C 192.168.128.0/24 is directly connected, irve.secondary
S 192.168.128.0/27 [10/0] via 10.4.255.4, boucle4.violet, [1/0]
S 192.168.128.32/27 [10/0] via 10.4.255.2, boucle4.violet, [1/0]
S 192.168.128.64/27 [10/0] via 10.4.255.3, boucle4.violet, [1/0]
S 192.168.128.96/27 [10/0] via 10.4.255.5, boucle4.violet, [1/0]
S 192.168.207.0/24 [10/0] via 10.4.255.2, boucle4.violet, [1/0]
S 192.168.223.0/24 [10/0] via 10.4.255.4, boucle4.violet, [1/0]
S 192.168.229.0/24 [10/0] via 10.4.255.3, boucle4.violet, [1/0]
Routing table for VRF=20
C 192.168.202.0/24 is directly connected, VIDEO SIEGELPA
C 192.168.224.0/24 is directly connected, VIDEO CAILLOU
C 192.168.225.0/24 is directly connected, VIDEO HDVVIL
C 192.168.235.0/24 is directly connected, VIDEO MARCHEGA

LPA-HALLES-FW100F-01 # get router ospf
abr-type : standard
auto-cost-ref-bandwidth: 1000
distance-external : 110
distance-inter-area : 110
distance-intra-area : 110
database-overflow : disable
database-overflow-max-lsas: 10000
database-overflow-time-to-recover: 300
default-information-originate: disable
default-information-metric: 10
default-information-metric-type: 2
default-information-route-map:
default-metric : 10
distance : 110
rfc1583-compatible : disable
router-id : 10.200.0.1
spf-timers : 5 10
bfd : disable
log-neighbour-changes: enable
distribute-list-in :
distribute-route-map-in:
restart-mode : none
area:
== [ 0.0.0.0 ]
id: 0.0.0.0
== [ 0.0.0.2 ]
id: 0.0.0.2
== [ 0.0.0.3 ]
id: 0.0.0.3
ospf-interface:
== [ boucle.jaune ]
name: boucle.jaune
== [ fortilink ]
name: fortilink
== [ boucle1.bleu ]
name: boucle1.bleu
== [ boucle2.rouge ]
name: boucle2.rouge
== [ boucle4.violet ]
name: boucle4.violet
== [ boucle5.vert ]
name: boucle5.vert
network:
== [ 1 ]
id: 1 prefix: 10.1.255.0 255.255.255.0 area: 0.0.0.0
== [ 2 ]
id: 2 prefix: 10.200.0.0 255.255.255.0 area: 0.0.0.0
== [ 3 ]
id: 3 prefix: 10.3.255.0 255.255.255.0 area: 0.0.0.2
== [ 4 ]
id: 4 prefix: 10.4.255.0 255.255.255.0 area: 0.0.0.0
== [ 5 ]
id: 5 prefix: 10.5.255.0 255.255.255.0 area: 0.0.0.0
== [ 6 ]
id: 6 prefix: 10.2.255.0 255.255.255.0 area: 0.0.0.0
neighbor:
passive-interface :
summary-address:
distribute-list:
redistribute:
== [ connected ]
name: connected status: enable metric: 0 routemap:
== [ static ]
name: static status: disable metric: 0 routemap:
== [ rip ]
name: rip status: disable metric: 0 routemap:
== [ bgp ]
name: bgp status: enable metric: 0 routemap:
== [ isis ]
name: isis status: disable metric: 0 routemap:

this is only configuration OSPF in graphics modes, not dynamic configuration implemented in routing table, Attached the image

But I can see it on this command: get router info ospf neighbor

but why in ( "routing table all" ) i can't see the ospf configuration?

[Richie_C]

Hi @goutham28404 

The following document is good for troubleshooting OSPF configuration. 

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-troubleshoot-OSPF-neighborship-in-v...

I hope it helps!

[goutham28404]

Hello packets are send and received, but 

why in ( "routing table all" ) i can't see the ospf configuration?

2025-02-14 03:23:45 OSPF: IFSM[boucle3.jaune:10.3.255.254]: Hello timer expire
2025-02-14 03:23:45 OSPF: SEND[Hello]: To 224.0.0.5 via boucle3.jaune:10.3.255.254, length 48
2025-02-14 03:23:45 OSPF: -----------------------------------------------------
2025-02-14 03:23:45 OSPF: Header
2025-02-14 03:23:45 OSPF:   Version 2
2025-02-14 03:23:45 OSPF:   Type 1 (Hello)
2025-02-14 03:23:45 OSPF:   Packet Len 48
2025-02-14 03:23:45 OSPF:   Router ID 10.200.0.1
2025-02-14 03:23:45 OSPF:   Area ID 0.0.0.2
2025-02-14 03:23:45 OSPF:   Checksum 0xd5bf
2025-02-14 03:23:45 OSPF:   AuType 0
2025-02-14 03:23:45 OSPF: Hello
2025-02-14 03:23:45 OSPF:   NetworkMask 255.255.255.0
2025-02-14 03:23:45 OSPF:   HelloInterval 10
2025-02-14 03:23:45 OSPF:   Options 0x2 (*|-|-|-|-|-|E|-)
2025-02-14 03:23:45 OSPF:   RtrPriority 1
2025-02-14 03:23:45 OSPF:   RtrDeadInterval 40
2025-02-14 03:23:45 OSPF:   DRouter 10.3.255.3
2025-02-14 03:23:45 OSPF:   BDRouter 10.3.255.254
2025-02-14 03:23:45 OSPF:   # Neighbors 1
2025-02-14 03:23:45 OSPF:     Neighbor 10.3.255.3

2025-02-14 03:23:48 OSPF: -----------------------------------------------------
2025-02-14 03:23:50 OSPF: RECV[Hello]: From 10.3.255.3 via boucle3.jaune:10.3.255.254 (10.3.255.3 -> 224.0.0.5)
2025-02-14 03:23:50 OSPF: -----------------------------------------------------
2025-02-14 03:23:50 OSPF: Header
2025-02-14 03:23:50 OSPF:   Version 2
2025-02-14 03:23:50 OSPF:   Type 1 (Hello)
2025-02-14 03:23:50 OSPF:   Packet Len 48
2025-02-14 03:23:50 OSPF:   Router ID 10.3.255.3
2025-02-14 03:23:50 OSPF:   Area ID 0.0.0.2
2025-02-14 03:23:50 OSPF:   Checksum 0xd5bf
2025-02-14 03:23:50 OSPF:   AuType 0
2025-02-14 03:23:50 OSPF: Hello
2025-02-14 03:23:50 OSPF:   NetworkMask 255.255.255.0
2025-02-14 03:23:50 OSPF:   HelloInterval 10
2025-02-14 03:23:50 OSPF:   Options 0x2 (*|-|-|-|-|-|E|-)
2025-02-14 03:23:50 OSPF:   RtrPriority 1
2025-02-14 03:23:50 OSPF:   RtrDeadInterval 40
2025-02-14 03:23:50 OSPF:   DRouter 10.3.255.3
2025-02-14 03:23:50 OSPF:   BDRouter 10.3.255.254
2025-02-14 03:23:50 OSPF:   # Neighbors 1
2025-02-14 03:23:50 OSPF:     Neighbor 10.200.0.1
2025-02-14 03:23:50 OSPF: -----------------------------------------------------
2025-02-14 03:23:50 OSPF: NFSM[boucle3.jaune:10.3.255.254-10.3.255.3]: Full (HelloReceived)
2025-02-14 03:23:50 OSPF: NFSM[boucle3.jaune:10.3.255.254-10.3.255.3]: nfsm_ignore called
2025-02-14 03:23:50 OSPF: NFSM[boucle3.jaune:10.3.255.254-10.3.255.3]: Full (2-WayReceived)

[Richie_C]

Have you checked if you have a full adjacency? And check that it is not changing between full and 2way? You can check it with the following command:

get router info ospf neighbor

Also check that you don't have an MTU mismatch or duplicate router-id's