- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
The upgrade path for FP221C-v5.2-build490
How can I upgrade from version FP221C-v5.2-build490 to version v6.0.6?
Is there an upgrade path available?
Solved! Go to Solution.
- Labels:
-
FortiAP
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @choee840408 ,
Firstly, you should upgrade to the 5.4 version. After that, you can follow this document.
In my opinion, if it is possible. Upgrade your AP to the latest version without following the path. After the upgrade, reset your AP configuration and configure it again. Its the easiest way for this upgrade. Because your ap version is too old and if you want to follow this path you need a lot more upgrade operation.
NSE 4-5-6-7 OT Sec - ENT FW
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear @ozkanaltas
Thank you for your response. You've worked hard, and the issue has been resolved.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello @choee840408 ,
Firstly, you should upgrade to the 5.4 version. After that, you can follow this document.
In my opinion, if it is possible. Upgrade your AP to the latest version without following the path. After the upgrade, reset your AP configuration and configure it again. Its the easiest way for this upgrade. Because your ap version is too old and if you want to follow this path you need a lot more upgrade operation.
NSE 4-5-6-7 OT Sec - ENT FW
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Dear @ozkanaltas
Thank you for your response. You've worked hard, and the issue has been resolved.
