Dear Sir,I am encountering an issue while configuring SAML integration
between FortiAuthenticator and FortiGate IPsec VPN, and I would like to
request your assistance.Current requirements:FortiAuthenticator as
IdPFortiGate as SPConfiguration steps ta...
The LDAP configuration on FAC works fine when tested from the FortiGate,
but after I enabled FortiToken on FAC, the VPN connection fails. Why is
this happening?FAC version: 6.6.2FG version: 7.4.7FortiClient version:
7.4.3.1790
As per the subject, how to duplicate the LAN to WAN traffic from FG-A to
FG-B's LAN to WAN. The LAN IP is 172.20.1.254 and the WAN IP is
10.0.9.246. As shown in the image, how should this be handled?
Dear All,Thank you all for your help. The issue has been resolved. The
cause was that the SP configuration on my FortiGate did not have the
certificate enabled, which led to the connection failure. After enabling
it, everything is working fine now. T...
Dear gstefou,Hello, I followed the instructions in this guide for my
setup:https://docs.fortinet.com/document/fortigate/7.6.4/administration-guide/951346/saml-based-authentication-for-forticlient-remote-access-dialup-ipsec-vpn-clientsThe
guide instru...
Dear Sir,Both the FAC and FG are on the internal network.I will try the
command you provided:config system globalset auth-ike-saml-port
1001However, does the IPsec VPN also need to be changed to IKEv2?
