Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
klau
New Contributor

Slow internet on a new install of Fortigate 60E

I've got a Fortigate 60E v6.4.9build1966(GA) and am running into slow internet (both up and down) on a new install.  I've got a fibre 1G/1G that I tested without the fortigate and was able to get advertised speeds.

 

I'll list what I've done to see if there's anything I'm missing or doing wrong:

 

setup admin profile - user and suser profiles

 

setup network interfaces

  1. WAN - using ISP IPs they provided
  2. LAN - our internal netowork

setup static route - setup the route from LAN to WAN

setup firewall policy - as a test, everything was set to allow all, flow-based, and no security profiles

 

I've checked the ports:  1G full duplex at both ports, auto-negotiate, and both set to physical ports

As a "just in case" I tried to slip a gig dumb switch in between and it did not help.  There was a mention of TCP saw-toothing where the unit couldn't keep up with the burst in the knowlege base.  But implementing it didn't help.  I'm hoping there's something else I'm missing that will help with my situation.  Thanks in advance!

7 REPLIES 7
seshuganesh
Staff
Staff

Hi Team,

 

 

Can you let me know if you have configured traffic shaping policy, usually this could be the issue.

Also may i know what type of wan interface you are using ?

Do you observe any high cpu or memory in the firewall?

please keep us posted

klau

Hi, no traffic shaping that I know of, or can spot, and CPU and memory was pretty stable at around 10-15%

 

I'm using WAN1 for my ISP and LAN1 for my internal.

seshuganesh

Hi Team,

 

Can you directly connect to firewall and directly connect to ISP and match the speeds?

Also, please let me know what type of ISP you are using like dhcp or pppoe?

 

klau

Presently, it's just internet -> ISP modem -> fortigate -> laptop

If I connect direct to the modem, I get advertised speeds.  Connecting through the fortigate drops it to about 5%.  The WAN 

aionescu
Staff
Staff

Hi klau, 

 

To follow up on @seshuganesh comments, I would suggest the following:

klau
New Contributor

I will definitely give these a go!  Thank you.

klau
New Contributor

I finally figured out what was going on.  The laptop I was using had a 10/100 port, and for some reason, it slowed everything down to 10.  Not entirely sure why this was happening but swapping to a 10/100/1000 port fixed it.

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors